PartDesign Plane/ro
|
|
| poziția meniului |
|---|
| PartDesign → Create a datum plane |
| Ateliere |
| PartDesign |
| scurtătură |
| Nici unul |
| Prezentat în versiune |
| 0.17 |
| A se vedea, de asemenea, |
| PartDesign Point/ro, PartDesign Line/ro |
Descriere
Creați un plan de referință datum plane care poate fi folosit ca referință pentru schițe sau alte forme geometrice de referințe. Schițele pot fi atașate la planele de referință .
"Planul de referință care traversează cele trei colțuri ale cubului cu partea de sus a unui Cilindru folosind planul de referință X-Y".
Cum se folosește
A datum plane can only be created inside of a 
Body. Every body has an origin, which is hidden by default. To be able to refer to the origin base planes, make the the origin visible. You can do this before creating a datum plane.
- Apăsați butonul
Create a datum plane. - Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
- Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
- To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
- Select an attachment mode in the list.
- Define Attachment Offset values.
- Apăsați tasta OK.
Opţiuni
Faceți dublu clic pe eticheta DatumPlane din arborescența Model sau faceți clic cu butonul din dreapta și selectați Editați datum din meniul contextual pentru a edita parametrii. Pentru mai multe detalii despre modul referențiere și offset (decalajul referinței), consultați Attachment.
Proprietăți
Preferences
The default diffuse color and transparency of PartDesign datums is controlled by the DefaultDatumColor fine-tuning parameter.
Useful for
Datum planes have their uses:
- as arbitrary mirror plane,
- as support at a desired offset for multiple sketches,
- as support for a sketch that needs to be a specific offset/angle from the origin,
- as visible indicator (for example, a focal plane).
For support of a single sketch, they are basically redundant. They suffer from the Topological naming problem as much as sketches.
- DateMapMode: listează modul de atașare utilizat.
- DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
- DateLabel: numele dat obiectului, acest nume poate fi modificat dacă vă este mai comod.
- DateMapMode: lists the attachment mode used.
- DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
- DateLabel: name given to the object, this name can be changed at convenience.
PartDesign
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a shape binder, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system
- Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Boolean: Boolean operation
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Extras: Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Preferences: Preferences, Fine tuning
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub